Step 2. Route the outlet box wires through the
eter outer hole of the canopy adaptor plate. Attach the
crossbar and canopy adaptor plate to outlet box with screws
provided.
Step 3. With the large washer attached, pass the lag screw
through the center hole of canopy adaptor plate and screw
into guide hole. Tighten until outlet box is firmly mounted
to beam. This box must be firmly secured to the ceiling. We
recommend that the ceiling fixture outlet box be of suffi-
cient capacity enabling it to support the weight of fan and
light fixture under any conditions.
CANOPY
HATCH
Step 4. Attach the canopy to the crossbar mounting bracket behind the
installed outlet adaptor plate with three of the 8-32 x 2
screws and lock washers provided with your Casablanca fan. Hand tighten
until snug against the ceiling.
Note: On sloped ceilings, align the
canopy opening toward the top or peak
of the room.
LAG SCREW INSTALLATION
1
diam-
/
2
CANOPY HARDWARE
CANOPY
CANOPY INSTALLATION
1
long canopy
/
2
M
ISSION
LAG
SCREW
CANOPY SCREW (4)
CANOPY LOCK WASHER (4)
FEED OUTLET BOX
WIRES THROUGH
CANOPY OPENING
™
1
DIAMETER
/
2
OUTER HOLE
LARGE
WASHER
CANOPY
LOCK
WASHER
CANOPY
SCREW
5