Casablanca Mission Owner's Manual page 12

Step 18. Install the two blunt-tip
lightbulbs included with your Casablanca
fan. When replacing, be sure to only use
60 Watt bulbs maximum.
Step 19. Insert the threaded rod from
the light kit base through the hole in the
glass.
Step 20. Thread the base nut onto the
threaded rod from the light kit base.
Align the flat sides of the glass with the
flat sides of the fan.
Tighten the base nut securely.
Step 21. Slide the light kit cap over the
threaded rod so that it is flush with the
bottom of the glass.
Align the light kit cap so that the blank
panels match with the blank glass panels
as shown.
Thread the finial and tighten securely.
M
ATTACH GLASS TO FAN
GLASS
ASSEMBLY
SECURE GLASS
LIGHT KIT
CAP
ISSION ™
BASE NUT
FINIAL
THREADED
ROD
BLANK
PANEL
11