Casablanca Mission Owner's Manual page 10

Step 14. Remove the wire nuts on the BLACK
and WHITE wires from the fan. If necessary re-
move the insulation from the last
wire (fan and light fixture).
Step 15. Attach the switch housing wires to
the light fixture wires by placing the bare ends
of the wires together and then securing with a
wire nut. Connect in this order:
• WHITE wire from fan to WHITE wire from
light fixture. Secure with wire nut.
• BLACK wire from fan to BLACK wire from
light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare
wire is visible; pull on each wire to test the
connection is mechanically sound.
WIRE NUT
Step 16. Slide the light kit base over the
switch housing, assuring that no wires are
pinched. Align the holes in the light kit
base with the holes in the switch hous-
ing and secure with the screws removed
in Step 13.
Tighten securely
by hand only.
LIGHT KIT BASE WIRING
" of each
1
/
2
INSTALL LIGHT KIT BASE
M
ISSION
™
9