Table of Contents
Advertisement
L
ANAI
BLADE INSTALLATION
Step 10. Attach each blade to a blade
holder securing it with the four blade
screws provided.
Using the screwdriver, tighten securely
BLADE SCREW
by hand only.
(4 PER BLADE)
BLADE
BLADE
HOLDER
REMOVE SHIPPING BLOCKS
Step 11. On the flywheel remove the five
SHIPPING
shipping blocks by unscrewing the screws.
BLOCKS
Set these screws aside for installing the
blades in Step 12.
Discard the five shipping blocks.
BLADE/BLADE HOLDER INSTALLATION
Step 12. Using the five screws removed in
Step 11, and the five additional screws from
the pack, attach each blade/blade holder as-
sembly to the motor.
Using the screwdriver, tighten securely by
hand only.
7
Advertisement
Table of Contents
