Configure For Networking - FLIR Quasar CM-6405 Installation And User Manual

Installation
Tip:
To make it easier to mount and install the camera, while the camera is on the bench or in the lab, you
can connect Ethernet and other cable patch cords to the camera's connectors and route them through
the grommets on the base and through the mounting
the camera without separating the camera base from the mounting bracket a second time.
3.2.3

Configure for Networking

By default, DHCP is enabled on the camera and a DHCP server on the network assigns the camera an IP
address. For example, if FLIR's Horizon or Meridian VMS is managing the camera and the VMS is
configured as a DHCP server, the VMS automatically assigns the camera an IP address.
If FLIR's Latitude VMS is managing the camera or it is on a network with static IP addressing, configure
the unit with a static IP address rather than with DHCP. This ensures that the IP address will not
automatically change in the future and interfere with configurations and communication. You can
manually specify the camera's static IP address using the DNA tool or the camera's web page. The
camera's default IP address is 192.168.0.250.
To manually specify the camera's IP address using the DNA tool:
1. Make sure the camera and the PC are on the same LAN segment.
2. Run the DNA tool (DNA.exe) by double-clicking
devices on the VLAN and their current IP addresses.
In the DNA Discover List, verify that the camera's status is Online.
If this is the first time you are configuring the camera or if it is the first time after resetting the camera
to its factory defaults, DNA automatically authenticates the camera with the default password for the
camera's admin user (admin).
If the admin user password has been changed, you need
to authenticate the camera.
In the DNA Discover List, right-click the camera and
select Login.
CM-640x Installation and User Guide - Revision 100 - December 2020
bracket. Then, you'll be able to mount and install
. The Discover List appears, showing compatible
DNA Discover List
This document does not contain any export-controlled information.
DNA > Right-click > Select Login
15