Cooling Kit (Cf-479B-Rs ) Installation; Figure 4-3: Iei Cf-479B-Rs Cooling Kit - IEI Technology PICOe-6612 Series User Manual

4.4.2 Cooling Kit (CF-479B-RS ) Installation

Figure 4-3: IEI CF-479B-RS Cooling Kit

IEI provides a cooling kit designed for socket 479 CPUs. (See Figure 4-3) The cooling
kit is comprised of a CPU heat sink and a cooling fan.
NOTE:
The CF-479B-RS heat sink comes with a sprayed layer of thermal paste.
Make sure the paste is not accidentally wiped during the unpacking or
installation of the heat sink. Thermal paste between the CPU and the heat
sink is important for optimum heat dissipation.
To install the CF-479B-RS cooling kit, please follow the steps below.
Step 1: Place the cooling kit onto the CPU. Make sure the CPU cable can be
properly routed when the cooling kit is installed.
Step 2: Properly align the cooling kit. Make sure its four spring screw fasteners can
pass through the pre-drilled holes on the PCB.
Step 3: Secure the cooling kit. From the solder side of the PCB, align the support
bracket to the screw threads on heat sink that were inserted through the PCB
holes. (See Figure 4-4)
PICOe-6612
Page 75