Table of Contents
Advertisement
The PICOe-6612 must be installed onto a PCI backplane. PCI backplanes are available
from IEI. Please visit the IEI website (www.ieiworld.com) or contact an IEI sales
representative for more details.
To install the backplane into the chassis, please refer to the chassis and backplane user
guides respectively.
4.6.3 Install the CompactFlash card
To install the a CF card (Type 1 or Type 2) onto the PICOe-6612, please follow the steps
below:
Step 1:
Place the CPU card on an anti-static pad with the solder side facing up.
Step 2:
Locate the CF socket.
Step 3:
Make sure the CF card is properly aligned with the CF socket.
Step 4:
Gently insert the CF card into the socket making sure the socket pins are
properly inserted into the socket (Figure 4-10).
Figure 4-10: CompactFlash Card Installation
PICOe-6612
Step 0:
Page 85
Advertisement
Table of Contents
