MIXVIBES CROSS DJ User Manual page 61

•
a 3 band equalizer for each player to control the cut/boost of the three fre-
quency ranges and a Kill button for each range to complete cut it. the mixer
sections of the u-mIX control pro and u-mIX control 2 controllers con-
tain dedicated encoders for the three frequency ranges of the equalizer. turn
the encoders to modify the equalization of your media file. Treble, medium and
bass can be adjusted with these knobs. press the encoder to completely cut the
low, mid or high frequencies of your media file.
•
a gain knob to set the gain level and a mute button to mute the audio of the
corresponding player.
Internal Mixer Mode
Volume/Cue
Input Mode
Gain/Mute
Equalizer/
Level Meter
Channel Fader
In both mixer modes the mixer panels show the pre-fader level of the player. pre-
fader means that the position of the channel fader and the cross fader does not
affect the level meter.
again, in both mixer modes you can use the Sources button to select the Input
mode.
Recorder
the buttons in the recorder panel can be used to record your mix, to record the
audio of the players, or to record both at the same time. more information about
the recorder panel can be found in section "recording" on page 99
Browser and Preview Player
the Browser panel allows you to access the tracks in your collection and your
itunes library. this panel offers some sophisticated search features so you can
quickly find the track you wish to play next. The browser is explained in more detail
in chapter 7 on page 73 and onwards.
the preview player can be used to preview the track that is currently selected in
the browser. you do not need to load a track into the preview player, simply press
its play button. the audio from the preview player can be heard in your headphones
if you use internal mixer mode. In external mixer mode the audio of the preview
player is routed to the audio interface port configured as Output 3.
Cross Fader
The CROSS DJ User Interface
External MIxer Mode
Input Mode
Level Meter
61