MIXVIBES CROSS DJ User Manual page 59

The CROSS DJ User Interface
Player A and B
the largest area of the croSS DJ user interface is occupied by the two players.
Waveform with Beatgrid
Pitch and Tempo
Playback Info
Transport
Full Track Display
the player on the left is called player a (yellow); the player on the right is player
B (red). the waveform area shows a section from the track currently playing. you
can use the outer buttons to zoom in, zoom out and to reset the waveform to the
default zoom factor. the white vertical line is the play marker and marks the part
of the track that is currently audible.
the inner panel of the players contain the pitch faders that work similarly to the
pitch faders that can be found on turntables and cDJ players.
the section with the black background shows some vital playback information: the
current time, the remaining time, the current Bpm and the current tempo change
as a percentage value.
the transport section contains the play/pause and the cue buttons; they work in a
similar way to the corresponding buttons on a cDJ player. you can use the Smart
Seek buttons in the transport section to jump forward/backward in a track and
define the jump length in beats or fractions of a beat. Click the Reverse button
at the right side of the transport section if you wish to play the track backwards.
Advanced Controls for Player A/B
Below the player you see a panel with the advanced controls. they allow you to
set locators/hot cues in your tracks, to create automatic and manual loops and to
modulate the player audio with the effects. chapter 9 starting on page 88 takes a
closer look at the features of the advanced controls panel
Loops
Locators/Hot Cues Effects
59