Change System Settings" Button [System->] - OCULUS Easygraph 70620 Instruction Manual

7.5.4.1 "Change System Settings" Button [System->]
Here you can set the communication mode and the
interface.
Instruction Manual Easygraph
• Mode
• Interface
The Easygraph only responds if the "Online"
mode has been selected. Setting the mode to
"Demo mode" permits you to use the software
without the Easygraph.
The USB communication of the Easygraph is
performed either by clipboard- or file interface, as
desired. In most cases the file interface is faster.
Page 63