OCULUS Easygraph 70620 Instruction Manual page 59

Loading fitted contact lenses:
Stored refraction and
automatically loaded together with the examination
data (cf. 7.5.5.1 page 70).
After starting the "Contact lens fitting" routine the
program transfers the loaded contact lens data into
their respective fields (in the contact lens fitting dialog
box). The content of the data fields is therefore not
merely a suggestion but constitutes a properly fitted
contact lens, and there is consequently no blue
highlighting of contact lenses in the suggestion list.
Instruction Manual Easygraph
contact lens data are
The fluo image is not stored along with the other data
and should therefore first be calculated by clicking
the [Calc. fluo.] button and assessed. The refraction
data are likewise only displayed once the fluo image
has been calculated.
If you make no changes to any contact lens or
refraction parameters, you will not encounter any
questions when exiting the contact lens fitting routine
([Quit] button). However, if you change a parameter,
you will be asked, for example, the following
question:
Now you can choose whether to store the new
contact lens parameters or keep the old ones.
Page 59