Backup Copies Of Data; Backing Up Data; Data Restoration; Auto-Backup - OCULUS Easygraph 70620 Instruction Manual

The [Backup] button opens the "Backup" window,
which consists of two areas:
Save and Restore
These areas are used to specify the directory in
which backup-copies of data are to be created or
from which data are to be called to the screen. For
example, this is "F:\" in the case of an external drive
with exchangeable data storage media (removable
hard disks).
The backup can take place according to different
criteria:
• "Save All Data"
Copies are made of all examinations and patient
data.
The restoration of already stored data can likewise
be carried out according to different criteria:
• "Delete Existing Data First"
This function removes all presently stored
examination data of a patient before restoring it to
the backup data
restoration, therefore, only those examinations
will be present which have been restored on the
backup data storage medium.
It is also possible to save data via an automatic
backup. In this case a backup copy of the new
examination data is always made at the end of the
examination program.
Instruction Manual Easygraph

7.4.6 Backup Copies of Data

7.4.6.1 Backing Up Data

7.4.6.2 Data Restoration

storage medium. After

7.4.6.3 Auto-Backup

• "Changed and New Data Only"
Only those data are copied which have changed
or been newly created since the last backup.
• "Including CCD Images"
This function can be turned off to reduce memory
requirements. This is useful for data backup to
floppies.
Note: ⇒ Backup of data can take a long time,
depending on the volume of data; therefore it is best
to use this function when the PC (and the
Easygraph) will not be needed for a while.
Activate [Save] in order to start the data backup.
• "Add Examination Data"
This function adds the examination data of the
data storage medium to the already existing
examination data of the patient.
[Restore] Uploads data from the backup medium
into the system.
This function is activated in the menu "Change
Settings".
This function should only be used if an additional
drive with an exchangeable data storage medium is
present.
Page 19