Warning System - TOHATSU M 60C Owner's Manual

Hide thumbs Also See for M 60C:
Table of Contents

Advertisement

ENOM00039-0

5. Warning system

If outboard motor encounters an abnormal
condition of fault, the warning buzzer will
emit a continuous beep or intermittent
short beeps and the warning lamp (LED)
will synchronize with the buzzer and
engine speed will be limited (engine will not
be stopped).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-C
Location of warning buzzer and
lamp
Warning buzzer
RC model: Located inside the remote con-
trol.
Tiller handle model (Oil auto mixing type
only): Located inside of the top cowl.
Warning lamp (LED)
RC model: Located in the tachometer.
Tiller handle model : none
60/70, 90
1. Warning lamp
115/140
1. Warning lamp (Oil)
2. Warning lamp (Over heat)
1
ENOF00851-A
PRE-OPERATING PREPARATIONS
1
41
2
ENOF02389-0
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 70cxM 140a2M 70cM 90a2M 115a2

Table of Contents