Warming Up The Engine - TOHATSU M 60C Owner's Manual

6. Set the control lever in the Neutral
position.
7. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it quickly.
8. After engine starts, do not reinstall fly-
wheel cover and top cowl.
ENOM00518-0
If the choke solenoid fails to
operate (EP type only)
1. Remove the top cowl.
2. Close the choke plate by finger.
60/70
90, 115/140
1. Choke plate
3. Raise the Free accel lever a little.
4. Turn the main switch key to start posi-
tion.
ENOF02391-0
5. Stop pushing the key when the engine
has started.
6. Return the choke plate to open posi-
tion.
ENOM0004B-0

4. Warming up the engine

ENOW00932-0
Be sure to check that cooling water is
coming out of the cooling water check port
during warm up.
Warm the engine at low engine speeds for
1 about
3 minutes : above 41°F (5
5 minutes at 2000 min
41°F (5
This allows the lubricating oil to circulate to
all parts of the engine. Operating the
engine without warm up shortens the
ENOF02384-0
engine's life.
ENGINE OPERATION
CAUTION
)
-1
(rpm) : above
)
51
1
ENOF02383-0
7