TOHATSU M 60C Owner's Manual page 29

* The advancer arm on the engine should
be contact with the stopper of the cylin-
der crank case assembly so that the
throttle valve of the carburetor is to be
fully closed condition.
1
1. Advancer arm
2. Stopper (Throttle fully closed side)
3. Stopper (Throttle fully opened side)
5. Adjust the cable joints until the hole of
each is aligned with the advancer arm
pin.
After adjustment, lock each cable joint
with the nut and secure it with the R-
pin.
3
4
1. Cable joint
2. Nut
3. Washer
4. R-pin
6. Connect cord assembly B to cord
assembly A
Connect the pink and light-blue leads
from cord assembly A and B together.
2
3
ENOF02313-0
1
2
ENOF02314-0
1. Cord assembly A
2. Cord assembly B
ENOW01705-0
90
1. Detach the upper engine cover.
2
1. Upper grommet
2. Cord assembly B hole
2. Detach the upper grommet cord clamp
bolt.
1
1. Cord clamp
3. Detach the throttle and shit cable joints
by removing the R-pins.
27
INSTALLATION
1
2
ENOF02315-0
1
ENOF02316-0
ENOF02320-0
5