Removing And Carrying The Outboard Motor; Removing The Outboard Motor; Carrying The Outboard Motor - TOHATSU M 60C Owner's Manual

Hide thumbs Also See for M 60C:

Table of Contents

REMOVING AND CARRYING THE OUTBOARD MOTOR

Before removing the outboard motor on the

boat, hang the outboard motor with the

hoist or equivalent device by attaching the

engine hanger to the outboard.

Use the hoist with allowable load is 250 kg

(550 lbs) or above.

Engine may be hot immediately after oper-

ating and could cause burns if touched.

Allow engine to cool down before attempt-

ing to carry the outboard.

1. Stop the engine.

2. Remove the top cowl.

3. Disconnect the fuel connector, the

remote control cables and the battery

cords from the outboard motor.

4. Attach the hoist hooks to the engine

5. Remove the outboard motor from boat

and completely drain the water from

the gear case.

Be sure to disconnect fuel connector

except when operating engine.

Fuel leakage is a fire or explosion hazard,

which can cause serious injury or death.

Close air vent screw of fuel tank before

carrying or storing outboard motor and fuel

tank, or fuel may leak, potentially catching

Table of Contents

M 70cx M 140a2 M 70c M 90a2 M 115a2