60
ENGINE OPERATION
1. Reverse lock lever
2. Tilt up position (FREE)
3. Tilt down position (LOCK)
4. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted up.
1
7
1. Tilt stopper
ENOM01713-0
Tilt down
1. Release the tilt stopper.
1
1. Tilt stopper
2. Pull the reverse lock lever upward until
it stops. (This is the tilt FREE position.)
3. Allow gravity to lower the outboard
motor.
4. Push the reverse lock lever downward
until it stops.
2
1
3
ENOF02353-0
ENOF01319-0
ENOF01319-0
2
1. Reverse lock lever
2. Tilt up position (FREE)
3. Tilt down position (LOCK)
ENOM00069-A
Power Trim & Tilt type
Tilt up
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up.
2. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted up
Tilt down
1. Release the tilt stopper from the set-up
position while slightly tilting up out-
board motor.
2. Operate the Power Trim & Tilt switch
and tilt the outboard motor down until
the motor touches to the thrust rod.
UP
DN
1
1
3
ENOF02353-0
ENOF00067 2
ENOF01319-0