Table of Contents
Advertisement
JC-24x - Version Update from 3.25 to 3.26
Operating System Update
OS File for Updating the
Operating System
Downloading the OS File
Operating System
Update by means of
JetSym
Minimum Requirements
Jetter AG
For updating the OS the following file is needed:
OS File
JC-24x_3.26.0.0.os
Jetter AG make operating system files available for download from their
homepage at www.jetter.de. OS files can be found in the support area or on
the page of the JC-24x controller via quicklink.
To update your OS proceed as follows:
Step
1
Download the OS file from www.jetter.de
2
Establish a connection between PC and controller
3
In JetSym, activate menu item "Build -> Update OS"
4
Select the OS File
5
Initiate the OS update by clicking OK
6
Result:
Following Power OFF / Power ON the new OS is launched.
For programming a JC-24x with version 3.26 JetSym 2.3.1 or higher is
required.
Description
OS file for JC-24x with version 3.26
Action
Introduction
5
Advertisement
Table of Contents
