Table of Contents
Advertisement
Memory sending
Scans a document into memory before the FAX-L360 dials the number(s)
and sends it. This method allows you to retrieve your original document
immediately after scanning.
Modem
A device that converts (MOdulates) digital data for transmission over
telephone lines. At the receiving end, this device converts the modulated
data (DEModulates) to digital format that the computer understands.
N
Noise
A term applied to a variety of problems that impair the operation of
telephone lines used for faxing.
Numeric buttons
The round, numbered buttons on the operation panel marked the same as
a standard telephone keypad. Press them to perform regular dialling. You
also use the numeric buttons to enter numbers and letters when you
register numbers and names, and for entering coded speed dialling
codes.
O
One-Touch Speed Dialling
An automatic dialling method that allows you to dial a fax or telephone
number by pressing a single One-Touch Speed Dialling button. The
FAX-L360 can store up to 32 numbers for One-Touch Speed Dialling.
One-Touch Speed Dialling buttons
The buttons numbered 1 to 32 on the operation panel, each of which may
be registered as a fax or telephone number. Once a number is registered,
you press one button to dial the entire number.
P
Paper feed
Refers to guiding a sheet of paper into the unit's paper path.
G-6
Glossary
Advertisement
Table of Contents
