Table of Contents
Advertisement
USER SETTINGS
For details on accessing the settings below, see page 15-3.
The selectable settings and the default settings vary depending on the country where
you have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix C.
Setting
1.DATE & TIME
2.UNIT
TELEPHONE #
3.UNIT NAME
4.TX TERMINAL ID
TTI POSITION
TELEPHONE #
MARK
5.SCAN CONTRAST Selects the scanning contrast (See page 6-14.).
6.OFFHOOK
ALARM
7.VOLUME
CONTROL
CALLING VOLUME Selects the ring volume when the FAX detects a voice call.
KEYPAD VOLUME Selects the keypad touch beep volume.
ALARM VOLUME Selects the error alarm volume.
LINE MONITOR
VOL
8.RX CALL LEVEL
9.TEL LINE TYPE
10.R-KEY SETTING Enables dialling through a switchboard.
15-4
The Menu System
Description
Sets the current date and time (See page 3-9.).
Enters the fax/telephone number you want to appear
at the top of each fax page you send (See page 3-10.).
Enters the name or company name you want to appear at the
top of each fax page you send (See page 3-10.).
Enables/disables printing of the sender information
(See page 3-8.).
Selects whether the sender information is positioned inside or
outside the image area (See page 3-8.).
Selects the prefix for the unit number (See page 3-8.).
Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its cradle.
Sets the volume of the FAX sounds.
Selects the line monitor volume (sound during dialling).
Selects the ring type for incoming calls.
Selects the telephone line type setting for your FAX
(See page 3-12.).
If you select PBX, you can select additional sub-settings
(See page 10-2.).
Sub-Settings
–
–
–
ON
OFF
OUTSIDE IMAGE
INSIDE IMAGE
FAX
TEL
STANDARD
DARKER
LIGHTER
ON
OFF
–
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
HIGH
STANDARD
TOUCH TONE
ROTARY PULSE
PSTN
PBX
Chapter 15
Advertisement
Table of Contents
