Table of Contents
Advertisement
TX SETTINGS
For details on accessing the settings below, see page 15-7.
The selectable settings and the default settings vary depending on the country where
you have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix C.
Setting
1.ECM TX
2.MID PAUSE SET
3.AUTO REDIAL
REDIAL TIMES
REDIAL
INTERVAL
4.TIME OUT
15-8
The Menu System
Description
Enables/disables Error Correction Mode (ECM) during
transmission.
Selects the length of a pause entered within a fax/telephone
number with the Redial/Pause button.
Enables/disables automatic redialling if the other party's line is
busy on the first attempt (See page 6-26.).
Selects the number of redial attempts.
Selects the time interval between redial attempts.
Enables/disables automatic scanning of documents after the
fax number is entered.
ON: Scanning begins automatically five seconds after entering
the fax number (10 seconds if sending to multiple fax
numbers).
OFF: Scanning does not start automatically. (You need to
press Start/Copy to begin scanning.)
Sub-Settings
ON
OFF
2 SEC (1 to 15)
ON
OFF
2 TIMES (1 to 10)
2 MIN. (2 to 99)
ON
OFF
Chapter 15
Advertisement
Table of Contents
