Table of Contents
Advertisement
Automatic redialling
When the receiving fax machine is busy or does not answer, or when an
error occurs while sending, the FAX-L360 waits a specified time and then
automatically redials the number. If the receiving fax is still busy or does
not answer, the FAX-L360 waits the specified time and dials again. If the
fax still does not go through, the FAX-L360 prints an error TX report.
B
bps
Bits per second. Refers to the speed with which a fax machine sends and
receives data.
Broadcasting
Transmitting documents to more than one location (through the
FAX-L360's memory).
C
CCITT/ITU-T
Formerly known as CCITT, Consultative Committee for International
Telegraph and Telephone. CCITT has been replaced by the International
Telecommunications Union-Telecommunications sector (ITU-T), a
committee created to set international standards for telecommunications.
CNG
Calling Tone. This is a signal sent by fax machines to identify the call as
an incoming document. When the receiving fax detects this signal, it
automatically starts to receive the fax transmission. The majority of fax
machines in use today can send and detect CNG signals.
Coded Speed Dialling
An automatic dialling method that allows you to dial a fax or telephone
number by pressing the Coded Dial button and a two-digit code using
the numeric buttons.
Cursor
The underline symbol you see on the LCD display when you register
numbers and names in the FAX-L360. Press the
or
button to move
the cursor.
G-2
Glossary
Advertisement
Table of Contents
