Table of Contents
Advertisement
Setting the Receive Mode
Set the FAX-L360 receive mode as follows:
1.
Press Receive Mode.
Receive Mode
2.
If you want to change the receive mode, press Receive Mode until
the mode you want appears.
Receive Mode
Receiving Faxes and Phone Calls Automatically:
Fax/Tel Mode
Set this mode if you want your FAX-L360 to automatically switch
between voice and fax calls.
You can control precisely how your FAX-L360 handles incoming calls by
adjusting the settings described below.
Setting Up Fax/Tel Mode
When you select Fax/Tel Mode from the Data Registration menu, you can
also set the following options.
RING START TIME
When a call comes in, the unit checks to see if it is a person wishing to
speak to you or a fax machine trying to send a document. If your unit
does not have enough time to detect the fax tone, it assumes the call is
from a telephone. Use the RING START TIME setting to increase the
time the unit takes to check whether a call is from a fax machine or a
telephone. You can select a time between 0 and 30 seconds; the
default is 8 seconds.
Chapter 7
The LCD display shows the current receive mode setting.
7-5
Receiving Faxes
Advertisement
Table of Contents
