Playing Back An Hdmi Source - T+A DAC 200 User Manual

Playing back an HDMI source

• If necessary, first reduce the set volume.
• Use the source select buttons on the unit or the remote control to select the HDMI input to which you
have connected the source device to be played back.
• If a TV set is connected to the HDMI OUT output, the TV sound can be transmitted to the DAC 200 via ARC
(Audio Return Channel) if supported by the TV set. Select the source HDMI ARC for the TV sound.
• As soon as the source device delivers digital music data, the DAC 200 automatically adjusts to the for-
mat and sampling rate of the signal and the music signal becomes audible.
Playback via HDMI is only available with the optional built-in HDMI module.
j
To use the ARC function, the TV must support it and the DAC 200 must be connected to an ARC compatible in-
put on the TV.
Since the DAC 200 is designed for pure stereo playback, only the two front channels can be played back when
playing multi-channel material. Depending on the source device, the signal can also be muted. If possible, the
connected source device should therefore be switched to stereo playback (downmix function) and, if available,
the stereo track should be selected in the menu of the disc.
53