Connections; Digital Inputs; Analog Outputs; Analog Input - T+A DAC 200 User Manual

Connections

1

Digital inputs

S/P-DIF
OPT
AES/EBU
BNC
USB IN
2

Analog outputs

ANALOG OUT 1
ANALOG OUT 2
3

Analog input

ANALOG IN
44
Inputs for digital source devices with a coaxial (Cinch / RCA) digital output.
Inputs for digital source devices with optical digital output.
Inputs for digital source devices with AES/EBU digital output.
Inputs for digital source devices with digital BNC output.
The DAC 200 accepts digital stereo signals according to the S/P-DIF standard with sam-
j
pling rates from 32 to 192 kHz and DoP DSD64 (0x05/0xFA Marker) at all inputs listed
above.
Connection socket for a Windows PC, MAC or LINUX computer.
The DAC 200 accepts digital PCM stereo signals with sampling rates of 44.1...768 kSps
j
and digital DSD stereo signals from DSD64 to DSD1024* at this input.
* DSD512 to DSD1024 only from a Windows PC with installed driver or from a Linux PC
with kernel 4.4 or higher.
Balanced analog XLR output with fixed or variable output level.
Unbalanced analog RCA output with fixed or variable output level.
j
In the system settings menu (see chapter System settings), the analog outputs
(ANALOG OUT) can be set to a fixed or volume controled output level.
You can only use the balanced XLR or the unbalanced RCA connection.
Unbalanced analog line input for connecting source devices with RCA output (e.g.
turntables with integrated or pre-connected external phono preamplifier).