Connection Of Hdmi Devices; Connecting The Mains Cable; Wiring Diagram - T+A DAC 200 User Manual

Connection of HDMI devices *

Connect source devices such as a BluRay player or game console to the HDMI inputs (IN1 and IN2).
At the OUT socket, the picture signals of the two input sockets IN1 and IN2 are available for transmis-
sion to a television.
At the HDMI 1 and HDMI 2 inputs, the DAC 200 accepts digital PCM coded stereo signals with sampling rates
j
of 44.1 ... 384 kHz and DSD data with a sampling rate of DSD64.
If your TV set features the ARC (Audio Return Channel) function, the TV sound can be played back via the
DAC 200.

Connecting the mains cable

Connect the power cord to the DAC 200's AC power input, then connect the device to the power supply.
To achieve maximum possible interference rejection the mains plug should be connected to the mains
socket in such a way that phase is connected to the mains socket contact marked with a dot. The phase of
the mains socket can be determined using a special meter. If you are not sure about this, please ask your
specialist dealer.
Do not connect the DAC 200 and the other components to the mains until all necessary connections bet-

ween the devices have been established.

Wiring diagram

Digital source devices
e. g. CD-drive
e. g. Network streamer
e. g. CD-player
Power amplifier
e. g. integrated amplifier
Active loudspeakers
Computer
**
* Only possible with optional available factory-installed HDMI module.
** Either balanced XLR or unbalanced RCA connection. Do not use both
types of connection at the same time.
TV set
e.g. BluRay player
*
analog source device
*
43