Table of Contents
Advertisement
ANALOG OUT
ANT
DIGITAL OUT
DIGITAL IN
WLAN
LAN
USB
18
Back panel connections
Analog audio output
Please connect the analog output sockets to the inputs sockets of your
amplifier.
Use the amplifier input (*) corresponding to the device address which you have
assigned to the MP 1250 R in the Configuration menu 'Device Adr' (chapter
Basic Functions of the MP 1250 R) .
(*) normally the AUX1 input
Space for input sockets of optional add-on modules.
Digital co-axial output for connection to an external digital/analogue converter
with an co-axial cable.
Inputs for digital source devices with optical or coaxial digital audio output.
Input socket for WLAN antenna
Automatic Activation of the WLAN Module
After powering on the MP 1250 R detects if it is connected to a wired LAN
Network. If no wired LAN connection is found, the MP 1250 R will automatically
activate ist WLAN module and it will try to get access to your WLAN network.
Attention!
When WLAN shall be used, the LAN socket must be left unconnected.
Socket for connection to a wired LAN (Ethernet) home network.
If a LAN cable is connected this will have priority over wireless WLAN net-
works. The WLAN module of the MP 1250 R will automatically be disabled.
Socket for the connection of USB Storage devices (USB-sticks or USB hard
discs). The storage device must be formatted with a FAT16 or FAT32
filesystem.
The USB device (example 2,5 inch HDD) can be supplied with power from the
MP 1250 R via the USB socket provided the power consumption of the USB
device conforms to the USB standard.
Advertisement
Table of Contents
