Back Panel Connections - T+A PA 2000 R User Manual

IN 1 ... IN 3
IN 4 ... IN 6
GND
Ground terminal
PRE OUT

54

Back panel connections

Universal pre-amplifier line inputs for connecting any stereo audio or TV equip-
ment fitted with symmetrical XLR outputs.

In the System Configuration menu it is possible to set input IN 3 (SRND) to
separate volume control for use with surround decoders. For more information
please see the chapter entitled 'Surround operation with the PA 2000 R'.
Universal pre-amplifier line inputs for connecting any stereo audio or TV equip-
ment fitted with asymmetrical RCA (Cinch) outputs.

In the System Configuration menu it is possible to set input IN 5 to separate
volume control for use with surround decoders. For more information please
see the chapter entitled 'Surround operation with the PA 2000 R'.

Input IN 4 can be upgraded to form an input for an analogue turntable by fitting a
Phono MM or Phono MC module (optional accessories).
The ground lead from an analogue record player is connected here in order to
avoid hum.
RCA (Cinch) pre-amplifier output for connecting external output stages or active
loudspeakers.
One pair of loudspeakers can be connected to the amplifier (SPEAKER  R
and SPEAKER  L). The impedance of each speaker must not be lower than
4  (DIN rating).

Caution!
Make sure that the terminals are firmly screwed down, and that no short-circuits
are possible as a result of projecting cable ends or errant wire strands.