Troubleshooting - Nortel Meridian 1 Manual

Troubleshooting

Table 41
Troubleshooting Meridian Modular Telephones (Part 1 of 4)
Symptom
Telephone does not work.
All LCDs flash and telephone
does not function.
Telephone wobbles.
Display does not work.
Use Table 41 to check problems encountered when installing Meridian
Modular Telephones and their options.
Solution
1
2
1
2
1
2
3
1
2
3
Add-on modules
Unplug the line cord from the telephone and plug it
back in.
If the telephone uses external power, make sure the
transformer or closet power supply is properly
connected and that the power supply board is
properly installed.
If the telephone does not use external power, make
sure that jumpers are placed connecting the bottom
two sets of pins on the P1 connector on the main
circuit board.
Press the Release (Rls) key.
Unplug the line cord from the telephone and plug it
back in.
Ensure that all cords are properly routed through
channels in the footstand.
Check that the footstand is firmly seated on the
telephone.
Ensure that all feet are firmly seated in the footstand.
Unplug the line cord from the telephone and plug it in
again.
Ensure that the transformer is plugged in or the closet
power is connected (M2008 only).
Ensure that the power supply board is installed
properly (M2008 only).
Telephone and attendant console installation
Page 209 of 224