Procedure 28
Designating 2500-type telephones
1
The designation window is located directly below the dial pad. Insert a
paper clip into the hole at the left or right end of the designation
window.
2
Gently pry the window toward the center and remove.
3
Insert number tag with the appropriate directory number and station
designator, and replace the designation window.
Procedure 29
Designating SL-1, digital, and Meridian Modular Telephones
1
Remove the cap from each key requiring a designation.
2
Place the designation in the cap, place the cap over the corresponding
key, and gently press down. Repeat for all keys requiring designations.
3
Insert a paper clip into the hole at the left or right end of the designation
window.
4
Gently pry the window toward the center and remove, and insert the
number tag.
5
Replace the designation window.
Telephones
Telephone and attendant console installation
Page 69 of 224