Nortel Meridian 1 Manual page 116

Page 104 of 224
553-3001-215 Standard 10.00 June 1999
Add-on modules
Figure 34
Attendant console knockout section
Base
15 Ensuring that the volume slider is fully engaged in the correct slider,
hold the top cover and console base firmly together. Turn the assembly
upside down (see Figure 38).
16 Reinsert the 12 screws that secure the top cover to the console base
and tighten.
17 Insert the two new screws supplied with the BLF/CGM that attach it to
the base, and tighten (see Figure 38).
18 Cable in BLF power at the local Main Distribution Frame (MDF) as per
M1250, M2250 cross-connections (see Procedure 9).
19 If required, replace the adjustable stand.
20 Reconnect the main system cable to the rear of the console.
21 If the BLF/CGM has been correctly installed, the main menu appears
when you supply power to the attendant console. Test the BLF/CGM
by selecting a menu option. Refer to Busy Lamp Field/Console
Graphics Module user guide (P0706875) for programming information.
22 Define the Busy Lamp Field in the system database. Refer to X11
features and services (553-3001-305).
Test the Busy Lamp Field features using M1250/2250 Attendant
23
Consoles user guide—North America (P0800563).
Knockout Section
(Clean Away 6 Tags)
553-1893