3�29 Securing Wheel To Module - WCP SS Swerve User Manual

WCP SS Swerve - User Guide
(Rev 1)
3.29 Securing Wheel To Module
Push the #1/4-20 BHCS bolt x 3�25" length through the whole in the fork into the dead
axle wheel shaft and then out the other hole on the opposing fork� Secure the bolt in
place with the #1/4-20 thin lock nut�
Note: This bolt can be installed with the bolt head is touching the fork shown below or
the opposite fork� Installing this bolt the opposite way will not effect performance�
WCP SS Swerve - User Manual (Rev 1) Page 39