Nd Stage Rotation Shaft Motor Plate Bearing - WCP SS Swerve User Manual

WCP SS Swerve - User Guide
(Rev 1)
3.19 2 Stage Rotation Shaft Motor Plate Bearing
nd
Insert the 0.375" ID x 0.875" OD x 0.28" WD bearing into the specified hole shown be-
low and secure the bearing into place by tightening down the 2 x #10-32 BHCS x 0�25"
length bolts�
Note: These bolts will not sit flush with the plate as they are meant to only retain the
WCP SS Swerve - User Manual (Rev 1) Page 29