Table of Contents
Advertisement
WCP SS Swerve - User Guide
(Rev 1)
3.23 Secureing 45T Bevel Gear to Wheel
Push the 45T bevel gear into the wheel such that the flat face of the wheel matches
the picture below� Then secure the bevel gear to the wheel by tightening the 5 x #10-
32 SHCS bolts x 0�375" length from the back side of the wheel so that none of the bolt
heads are visible when looking at the 45T bevel gear�
WCP SS Swerve - User Manual (Rev 1)
Page 33
Advertisement
Table of Contents
