Processor; User Interface; Inputs & Outputs; Power Supply Specifications (Absorption / Installation) - dBTechnologies VIO C Series User Manual

English
RMS amplifier power:
Peak power:

PROCESSOR

Internal controller:
A/D D/A converter:
Limiter:

USER INTERFACE

Controls:
INPUTS & OUTPUTS
Inputs:
Outputs:
Power supply:

POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)

Absorption at 1/8th of power in
medium use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Number of linkable speakers:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO C SERIES
1600 W
3200 W
32 / 96-bit DSP
24 bit/ 96kHz
Peak, RMS, Thermal
Push rotary encoder / OLED DISPLAY
1 balanced audio input, 1 RDNet input
1x XLR Link OUT, 1 RDNet output
powerCON TRUE1 IN/LINK
1.4 A (230 V) - 2.2 A (115 V)
3 A (230 V) - 4.9 A (115 V)
33 W
3 A
5 (1+4) (230 V) / 4 (1+3) (115 V)
Code 420120341 REV. 1.0
41