Processor; User Interface; Inputs & Outputs; Power Supply Specifications (Absorption / Installation) - dBTechnologies OPERA UNICA 12 User Manual

English
RMS amplifier power:
Peak power:

PROCESSOR

Internal controller:
A/D D/A converter:
Limiter:

USER INTERFACE

Controls:
INPUTS & OUTPUTS
Inputs:
Outputs:
Power supply:

POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)

Absorption at 1/8th of power in
medium use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Number of linkable speakers:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
OPERA UNICA 12 - OPERA UNICA 15
Peak, RMS, Thermal
Input switch and level, DSP preset rotary
1 balanced audio input (with Line/Mic selection), 1 RDNet input
1x XLR Link OUT, 1 RDNet output
powerCON IN/LINK
1.3 A (230 V) - 2.1 A (115 V)
2.6 A (230 V) - 4.4 A (115 V)
6 (1+5) (230 V) / 3 (1+2) (115 V)
900 W
1800 W
56-bit DSP
24 bit/48 kHz
19 W
46 A
Cod. 420120269 REV. 1.0
35