English
DRKL-3
J
w
DRKL-3 is the fly-bar for the flown installation of VIO-C clusters. It is used
Z
for a cluster of up to 2 layers of 3 elements each. Two shackles with pin for
hanging are included in the supply. 2 DRK-C units and the use of LP-1 link
w
plugs are required for installation, depending on the configuration.
DRKL-3 is characterised by:
W - BRACKETS FOR DRK-C
Z - MAIN BRACKET
J - HOUSING FOR LASER INCLINOMETER (OPTIONAL)
See the previous DRK-C section for preliminary details.
The installation starts with a cluster with 2 DRK-C units and relevant LP-1 link
plugs already installed.
The brackets W are fixed to the DRK-C units by their shackles, using the far
end holes shown in the figure.
Then the 2 shackles supplied are used on the main bracket Z, according to
the positions of the holes on the label (1-19 to comply with EUROCODE 3
regulation, 5-12 to comply with BGV-C1 regulation).
The maximum load is 280 kg/617.3 lbs.
VIO C SERIES
Code 420120341 REV..1.0
36
Need help?
Do you have a question about the VIO C Series and is the answer not in the manual?