Eighteeth E-CONNECT User Manual page 15

9.6 Additional function settings
Factory set as shown below:
Beep volume
Automatic shutdown time 10 mins
Mid Right hand or left hand
Automatic standby time
1.When the device is shutdown press
key S and main switch at the same time.
2.Press S, choose one of these functions
to setting.
3.Press +/- to set the parameters.
4.Press main switch, back to standby
interface
Beep Volume
Press + and - to set low, mid or high
volume
Auto P.W.R
For a period of time without any operation, the
device will be automatically shut down, by press +
- to set automatically shut down time
（1~15mins）
Return to standby time
By press +/- to change the standby time（1-
15s）
Calibration
By press +/- to select the 'ON' then press main
switch to activate the calibration program.
13
Right hand
10s
Hand
Change the left or right hand
interface, the screen will be
reversed.