Eighteeth E-CONNECT User Manual page 12

2)Choose memory：By press </>
E-CONNECT has 10 memories(M0 to M9)，users can set the memory(combine
different speed, torque and reverse direction ) by themselves. Memory M0 is
reciprocating mode, there are 5 units reciprocating degrees in M0, press S key to
switch. M1-M9 are for normal mode.
3)Start the motor：Press the main switch again
Start the motor will appear the torque bar interface
When the motor is running, the torque bar real time monitor will appear on the
LCD.
When the torque in file exceeds 70% of the set reverse torque, E-CONNECT will
make a discontinuous stone alarm.
When reaches 100% of the set reverse torque, E-CONNECT will make a
continuous alarm sound and carry out the reverse motion to disengage & carry
out the file from the canal.
4)Stop the motor：Press main switch
E-CONNECT will stop the motor and back to standby interface.
9.3 General function setting
General function：rotate speed，reverse torque，rotate direction
Display the standby
interface
Direction setting
Speed setting
Reverse torque setting
10