IndraControl XFE 01.1 Extension Mod-
ules Profibus, RT-Ethernet, Sercos, CAN
All lines of the 24 V voltage supply have to be routed separately from lines
carrying higher voltages.
All peripherals, such as digital sensors or actuators connected to the interfaces
of the control, also have to comply with the criteria of safety-separated circuits.
The same external power supply unit has to supply the 24 V voltage
supply of the XMx control and the extension modules. Connect the
voltage supply to the XD1 plugs of the XMxx control and then bridge
the cables to the power connectors XD1 of the extension modules,
refer to
connection variants are not permitted.
2
1
FE
24 V
GND
①
24 V voltage supply
②
Top-hat rail
③
Extension module
Fig. 10-7: Mandatory voltage supply
Mounting, demounting and electric installationI
fig. 10-7 "Mandatory voltage supply" on page
3
3
4
④
XM2x control
⑤
S20 Module
R911345570_Edition 05 Bosch Rexroth AG
19/31
19. Other
5
5