Unpacking And Inspection; Packing List; Power Supply - Applent Instruments Anbai AT510PRO User Manual

AT510x DC Resistance Meter
6
This chapter provides the following information:
1.1 Packing List
following procedure.
1.2 Power Supply
1. Unpacking and Inspection


Packing List



Power Supply

 Setup Fuse
 Operating Environment
 Cleaning
 How to Remove the Handle
After you receive the instrument, carry out checks during unpacking according to the
1. Check that the packing box or shock-absorbing material used to package the
instrument has not been damaged.
2. Referring to Table 1-1, check that all packaged items supplied with the meter have
been provided as per the specified optioned.
Table1-1 Included Accessories
NAME
User's Manual
AC Power Cord
Fuse
Kelvin Test Leads
Test Report
Product & Warranty Certification
Confirm that the power supplied to the AT510x meets the following requirements:
Voltage ： 198-252V AC
Frequency ： 47.5-66Hz
Consumption ： < 15VA
WARNING
：
The ground wire should be earthed to avoid being electric shock.
If you change the power cord, make sure the ground wire earthed.
QTY REMARK
1
1
2 0.5A Slow-Blow
1 ATL501
1
1