Applent Instruments Anbai AT510PRO User Manual page 12

AT510x DC Resistance Meter
12
Figure 3‐3 Keypad II
Table 3‐2 Primary Functions description
Key
Comparator
-%
Speed
Clear
Range
DH
Beep
<,> Arrow keys
Esc
Enter

ASSUMER：
Table 3‐3 Secondary Functions description
Key
Comparator
20mV-limited
Test Current Modes
Relative Value
Clear
Temperature Correction
Brightness
p,n,,m,k,M
Key Lock
Beep
Remote Control
Trigger

ASSUMER：
Comparator 30mV Limit
 -%
Comp
7
k
4
n
1
p
0
Data
Beep
Hold
Key Lock Beeper
Function
Setup comparator
*The function is invalid.
Measurement speed:（Slow）,（Medium）,（Fast）.
Correction(Short Zeroing)
Automatic, Range Hold. The AUTO indication is ON, range is automatic.
Data maintained. Equipment to stop testing, current measurements remains on the
displayer, not to refresh. The DH indication is ON, the data is held.
Turn ON/OFF Beep.
Select the range. It is enabled in the range hold status.
Return to the upper status. It is enabled in the setup status.
Confirm the operations. It is enabled in the setup status.
2 Secondary Function（Shift）
．
On the front Panel:
Orange Words on Panel represents 2
nd
The keys will be 2 function while the Shift mark on VFD is on.
Function
Open or close comparator function.
*The function is invalid in these AT510x versions.
Select test current modes:
High current（H-Cur） 、Low current（L-Cur）and Plus current（P-Cur）
Relative value display. The REL indicator is ON, the value is the Correction value.
Correction(Short Zeroing)
Used to set the compensation coefficient and temperature.
Adjust VFD Brightness
Unit. Select the unit in the input status.
Keypad Locked. Keypad locked, only Shift + keypad lock (KeyLock) button can
respond.
Setup beep's on/off.
Choose interfaces: RS232, GPIB and setup communication parameters.
Choose Trig modes: internal, external, manual and remote.
3 Numeric Keys
．
On the front Panel:
Blue Words on Button represents Numeric Key.

The numeric keys include
I-Mode Relative
Rate Clear
Brightness
j
8 9
M G
5 6

m
2 3
Range
.
+/-
←
Esc
Remote
nd
Function;
word keys, ESC key, Enter key and units (p, n, ,m,
blue

Trig
Enter
Trigger