Setting Up Fuse; Environmental Requirements; Cleaning - Applent Instruments Anbai AT510PRO User Manual

Dc resistance meter
Hide thumbs Also See for Anbai AT510PRO:
Table of Contents

Advertisement

1.3
Setting up Fuse
Please use the following fuse type
UL/CSA type, Slow-Blow, 5×20-mm miniature fuse, 0.5A, 250 V .
1.4
Environmental Requirements
Ensure that the operating environment meets the following requirements.
1.5

Cleaning

To prevent electrical shock, disconnect the AT510x power cable from the receptacle before
cleaning.
Use a dry cloth or a cloth slightly dipped in water to clean the casing.
Do not attempt to clean the AT510x internally.
WARNING:
Don't Use Organic Solvents (such as alcohol or gasoline) to clean the Instrument.
~Line: 47.5Hz - 66Hz
198VAC - 242VAC
10VA MAX
Fuse: 250V, 0.5AH
Slow Blow
Figure1-1 Fuse Holder
Temperature Range 0 ~
C 55 ,
Humidity Range <=95%RH, 40C
Unpacking and Inspection
C
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Anbai AT510PRO and is the answer not in the manual?

This manual is also suitable for:

Anbai at510Anbai at510seAnbai at510lAnbai at510m

Table of Contents