Safety Summary - Applent Instruments Anbai AT510PRO User Manual

AT510x DC Resistance Meter
2
Warning
When you notice any of the unusual conditions listed below, immediately terminate operation and disconnect the
power cable.
Please Contact Applent Instruments Incorporation sales representative for repair of the instrument. If you continue
to operate without repairing the instrument, there is a potential fire or shock hazard for the operator.
 Instrument operates abnormally
 Instrument emits abnormal noise, smell, smoke or a spark-like light during the operation.
 Instrument generates high temperature or electrical shock during operation.
 Power cable, plug, or receptacle on instrument is damaged.
 Foreign substance or liquid has fallen into the instrument.
Warning
The following general safety precautions must be observed during all phases of operation, service, and repair of this
instrument. Failure to comply with these precautions or with specific WARNINGS elsewhere in this manual may
impair the protection provided by the equipment. In addition it violates safety standards of design, manufacture, and
intended use of the instrument.
The Instrument
Operate In An Explosive
Service Or Adjust Alone
Substitute Parts Or
Modify Instrument
WARNING & DANGEROUS

Safety Summary

Dangerous:
Dangerous:
Disclaimer The Applent Instruments assumes no liability for the customer's failure to
comply with these requirements.
To avoid electric shock hazard, the instrument chassis and cabinet must be
Ground
connected to a safety earth ground by the supplied power cable with earth
blade.
DO NOT Do not operate the instrument in the presence of inflammable gasses or
fumes. Operation of any electrical instrument in such an environment
Atmosphere constitutes a definite safety hazard.
Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made by qualified
Keep Away
maintenance personnel. Do not replace components with the power cable
From Live
connected. Under certain conditions, dangerous voltages may exist even
Circuits
with the power cable removed. To avoid injuries, always disconnect power
and discharge circuits before touching them.
DO NOT Do not attempt internal service or adjustment unless another person,
capable of rendering first aid and resuscitation, is present.
Because of the danger of introducing additional hazards, do not install
DO NOT
substitute parts or perform unauthorized modifications to the instrument.
Return the instrument to an Applent Inc Sales and Service Office for service
and repair to ensure that safety features are maintained.
Dangerous voltage levels, capable of causing death, are present in this
instrument.
Use extreme caution when handling, testing, and adjusting this
instrument.