Safety Summary - Applent Instruments Anbai AT45 Series User Manual

AT45xx User's Guide
2
Warning
The following general safety precautions must be observed during all phases of operation, service, and repair of this
instrument. Failure to comply with these precautions or with specific WARNINGS elsewhere in this manual may
impair the protection provided by the equipment. In addition it violates safety standards of design, manufacture, and
intended use of the instrument.
Disclaimer
Ground
The Instrument
DO NOT
Operate In An Explosive
Atmosphere
Keep away
from live circuit
Operations not
included in the manual are
forbidden
Safety Sign:
Waste Electrical and Electronic Equipment (WEEE) order 2002/96/EC

Safety Summary

Dangerour：
The Applent Instruments assumes no liability for the customer's failure to
comply with these requirements.
To avoid electric shock hazard, the instrument chassis and cabinet must be
connected to a safety earth ground by the supplied power cable with earth
blade.
Do not operate the instrument in the presence of inflammable gasses or
fumes. Operation of any electrical instrument in such an environment
constitutes a definite safety hazard.
Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made by qualified
maintenance personnel. Do not replace components with the power cable
connected. Under certain conditions, dangerous voltages may exist even with
the power cable removed. To avoid injuries, always disconnect power and
discharge circuits before touching them.
The protection measurements will be failure while beyond the scope.
Warning: TO AVOIDE INSTRUMENT DAMAGED, PLEASE DO NOT
PUT DC VOLT OR CURRENT IN THE TESR TERMINAL
MAKE SURE THE CAPACITOR IS DISCHARGED BEFORE TESTING
Provide double insulation or reinforced insulation protection
Do not leave in the trash can