Working Safely - Leuze electronic HFM 3500D Short Description

Working safely

Attention! Access to or changes on the device, except where expressly described in this document, are not
authorized.
Qualified personnel
Mounting, commissioning and maintenance of the device must only be carried out by qualified personnel.
Electrical work must only be carried out by a certified electrician.
Attention Laser radiation!
If you look into the beam path over a longer time period, the retina of your eye may be damaged. Never look
directly into the beam path! Do not point the beam at persons!
The combi devices HFM 35x0D comply to the safety standards EN60825 for a class 2 product.
The HFM35x0D uses a low power visible laser diode. The average laser power is less than 1mW in
accordance with the definition of class 2 lasers. The scanner window is the only aperture through which laser
light may be observed on this product. The laser is activated after pressing the trigger button.
Short description HFM 3500D Leuze electronic Page 5