Visual Productions QuadCore Manual page 101

it takes RGBW colour which will be converted to four DMX channels. Therefor,
the footprint should at least be set to 4.
The Block CW feature is similar to the normal Block. The difference is that it
takes a level value which will be converted to two DMX channels. Therefor, the
footprint should at least be set to 2.
B.7 Time Server
Fetch a time from the NTP time server. Please refer to the Settings on page 74.
Feature Function
Refresh Set
B.8 Variable
Manipulate one of the 10 variables.
Feature Function
Set Value Set
Set Value Toggle
Set Value Control
Set Value Inverted Control
Set Value Decrement
Set Value Increment
Set Value Stop Continuous
Set Value Continuous Decrement
Set Value Continuous Increment
Set Value Control Scaled
Set Value Control Offset
Refresh Set
Single Dimmer Set
Curve Control
Curve Inverted Control
Variables are further explained on page 58.
The Single Dimmer feature is used to increase or decrease a level by using only
Parameter 1 Parameter 2
- -
Parameter 1
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
101
Parameter 2
Number in the range of [0,255]
Number in the range of [0,255]
-
-
-
-
-
Delta
Delta
-
-
-
Delta
Curve
Curve