Honeywell HercuLine 10260A Installation, Operation And Maintenance Manual page 2

Copyright, Notices, and Trademarks
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship.
Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during
the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The
foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including
those of merchantability and fitness for a particular purpose. Specifications may change without
notice. The information we supply is believed to be accurate and reliable as of this printing. However, we
assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is
up to the customer to determine the suitability of the product in the application.
ATTENTION
The emission limits of EN 50081-2 are designed to provide reasonable protection against harmful
interference when this equipment is operated in an industrial environment. Operation of this equipment in a
residential area may cause harmful interference. This equipment generates, uses, and can radiate radio
frequency energy and may cause interference to radio and television reception when the equipment is used
closer than 30 m to the antenna(e). In special cases, when highly susceptible apparatus is used in close
proximity, the user may have to employ additional mitigating measures to further reduce the electromagnetic
emissions of this equipment.
CE CONFORMITY
This product conforms with the protection requirements of the following European Council Directive:
89/336/EEC, the EMC directive and 73/23/EEC, the Low Voltage Directive. Conformance of this product
with any other "CE Mark" Directive(s) shall not be assumed.
ii 10260A Series Actuators – Installation, Operations, and Maintenance
Printed in U.S.A. – © Copyright 2003 by Honeywell
Revision 6 – February, 2003
Industrial Measurement and Control
Honeywell
1100 Virginia Drive
Fort Washington, PA 19034
2/03