4 Electrical Assembly
4.2.1 Power Distribution Board connections Solar-Input/AC-DC input with lead acid
battery back up
Connect the regulator input to lead acid
battery terminals directly. Hence even
the Sun Saver output is shut off due to
low voltage, the EVC output would
continue to get power from the batteries.
Pulse/Level input for MPC function
Connects the incoming voltage to modem
and external connector directly i.e., in this
case, the Sun Saver output is directly
connected to modem and external output.
Can connect to RV50, CL R100 and
CL R110 (CL R1XX - External input).