Web Configuration Page - ICP DAS USA ET-7000 Series User Manual

Chapter 3 Web Configuration Page

3. Web Configuration Page

ET-7000 series modules have a built-in Web configuration page with a friendly user interface
making it simple to configure using the standard web browser.
The configuration web page is optimized for Microsoft Internet Explorer 6.0, and the other
browsers can work well, but the Web pages might appear differently.
All the configuration of ET-70000 is constructed on web page and you can only click the web
to do everything through the on-board web pages using a standard web browser via Ethernet.
Don't need extra tools or utilities on Windows to configure and control the ET-7000.
Opening the browser to connect the ET-7000
1. Start up the Internet Explorer, and click the URL block at the top of the screen.
2. Input the URL address of the ET-7000 (Such as http://192.168.255.1) into the URL block
and press the "Enter" button to enter the login page.
Note:
The Factory default IP address is 192.168.255.1
The default user name and password is Admin and Admin (Case sensitive)
If you forget the user name or password, the ONLY way to start configuring ET-7000 is
to load factory default by using the web/console configuration
3. Input the User Name and password on the dialog, and then click the "OK" button. (See the
dialog box below)
ET-7000 AIO User Manual, Apr. 2009, V1.04, EMH-011-104----------56